Red Light Facial Beauty Instrument

The XB-15S Red Light Facial Beauty Instrument combines a flexible facial LED mask with a separate neck light therapy panel, both powered by one dual-output controller. The facial section contains 118 LED groups, while the neck section contains 62 groups, giving the complete system 180 LED groups and 1,440 light outputs.

Unlike a facial-only mask, the split facial-and-neck configuration extends the treatment area while allowing the two sections to be used independently. The lightweight flexible material and Type-C charging design also make the device easier to wear, store and use as part of a regular skincare routine.

Key Features

Facial + Neck Dual-Output Design

A single dual-output controller powers both the facial mask and neck panel. The two areas can be operated independently or together, providing a larger skincare coverage area than a conventional facial-only LED mask.

1,440 Light Outputs

The facial section uses 118 LED groups, with eight light outputs per group for a total of 944. The neck section uses 62 groups and 496 outputs. Together, the system provides 180 LED groups and 1,440 light outputs across the facial and neck areas.

Three Skincare Modes

Repair: Designed for a soothing daily skincare routine.

Brightening: Intended for skincare routines focused on dull-looking or uneven skin tone.

Anti-Wrinkle: Designed for skincare routines targeting the appearance of fine lines and loss of firmness.

2600mAh Dual-Output Controller

The 2600mAh rechargeable controller manages power delivery, mode selection and treatment timing. Its dual-output configuration allows the facial and neck components to operate from one controller, reducing the need for additional control units and cables.

Flexible Fit

The flexible mask bends with the contours of the face and neck, providing a closer fit across different face shapes than a rigid shell design. The foldable construction also helps reduce packaging volume for storage and transportation.

Product Guide

1. Connect

Connect the facial mask and neck mask to the corresponding L/R ports on the control box.

2. Select a Mode

Press and hold the Power button to turn on the device. Press the M button to cycle through the available modes: Repair, Fade, and Anti-Wrinkle.

3. Start the Treatment

Place the mask over the face and neck, then adjust the straps for a secure and comfortable fit. Each treatment session runs for 15 minutes and shuts off automatically when the session is complete.

Product Specifications

LED Light Therapy Technology

The XB-15S Red Light Facial Beauty Instrument uses selected LED wavelengths to provide a non-invasive light-based skincare experience. Depending on the product configuration, available light sources can include red, blue and near-infrared wavelengths.

Red light around 630 nm is commonly used in LED beauty devices for skincare applications, while blue light around 415 nm is commonly found in LED devices designed for oily and blemish-prone skin routines. Actual light dose depends on wavelength, irradiance, treatment distance and session time, so the specific optical output should always be referenced to the tested specifications of the final product.

The 2600mAh smart controller manages power delivery and operating modes, allowing the facial and neck components to work according to the selected program.

Application Scenarios

Daily Anti-Aging Skincare: Suitable for consumers focusing on the appearance of fine lines, skin tone and firmness.

Facial and Neck Care: Covers both areas in one system for users who want a wider skincare routine.

Home Skincare: The flexible mask is convenient to wear while relaxing, reading or following a daily skincare routine.

Beauty Salons: Can be incorporated into LED-based beauty and skincare services where appropriate.

Private Label: Suitable for beauty-device brands, spas, beauty chains and cross-border e-commerce businesses.

Project Case

Polish Premium Beauty Chain | 20,000-Unit Private Label Project

We supplied 20,000 customized XB-15S LED beauty devices for a premium beauty chain in Poland. The project used the facial-and-neck configuration and included product and branding customization for the local market.

According to customer feedback, the product's 1,440 light outputs, dual-area facial and neck design, and flexible foldable construction helped differentiate it from the customer's previous facial-only mask. During the customer's selected store testing, the new model achieved an approximately 35% increase in conversion rate compared with the previous product.

XB-15S vs. Basic Facial LED Mask

Optional Colors and Surface Finish

Color Options

The standard color combination is Pure White for the main body with Tech Gray detailing, creating a clean and professional aesthetic. Custom pastel and macaron color options are also available for private-label and customized orders.

Surface Finish

The facial mask is made from high-flexibility silicone with a soft-touch surface finish. Its flexible construction allows the mask to conform comfortably to different facial contours and neck curves, while the smooth surface is easy to clean and maintain.

OEM and ODM Customization

The XB-15S is suitable for customization by beauty-device brands, beauty salon chains, cross-border e-commerce sellers and wellness gift companies.

Customization options include:

- Logo Branding: Logo placement can be customized on the forehead area of the mask, controller or other suitable surfaces.

- UI and Voice Prompts: Interface language, operating prompts and voice notifications can be adapted for different markets.

- Light Configuration: Red, blue, yellow and near-infrared LED wavelength combinations can be evaluated according to project requirements.

- Color: Custom brand colors are available.

- Packaging: Custom beauty gift boxes, color boxes, manuals and retail packaging can be developed.

- Production Lead Time: Standard customized orders can typically be arranged within approximately 15–20 days, depending on order quantity and customization requirements.

Manufacturing Process

The XINGBU beauty-device production line covers the key stages of flexible mask forming, LED assembly, PCB processing and final product testing:

Clean-room molding → Automatic LED placement → PCB protective coating → Facial and neck assembly → Controller chip aging test → Full-current operation test → Functional inspection → Cleaning and packaging

For a battery-powered LED beauty device, production inspection focuses on LED operation, controller performance, battery power delivery and overall operating stability.

Quality Control

Optical Stability Test

Every LED therapy mask undergoes a 2-hour continuous spectral stability test to verify consistent light output during extended operation. The test monitors wavelength and optical performance to minimize output drift and abnormal heat generation.

Battery Cycle Testing

Each control unit is subjected to 5,000 charge-discharge cycles to evaluate long-term battery durability and capacity retention. Battery performance is monitored throughout the test to ensure stable operation and consistent power delivery over repeated use.

Certifications and Compliance

The device can be supplied with CE (LVD/EMC), RoHS, and FCC compliance documentation. Where applicable, U.S. FDA-related regulatory documentation can also be provided for the intended cosmetic device application.

Package & Shipping

Standard Package Includes:

- 1 × Flexible Facial LED Mask

- 1 × Flexible Neck Light Therapy Panel

- 1 × Dual-Output Smart Controller

- 1 × Adjustable Strap Set

- 1 × USB Charging Cable

- 1 × English User Manual

The flexible mask can be folded flat, allowing a more compact package than conventional rigid LED masks. This can help reduce storage space and international shipping volume.

Sample and small-quantity orders can be supplied from 1 unit, subject to stock availability. Bulk orders are scheduled according to customization requirements and production capacity.

FAQ

Q: Can the facial mask and neck panel be used separately?

A: Yes. The dual-output controller supports independent operation, allowing users to operate the facial mask or neck panel separately, or use both together.

Q: Does the mask produce heat during use?

A: The LED light source is designed for light-based skincare rather than heating. Users may notice a mild warmth during operation, but the device is not designed to produce a strong heating sensation.

Q: Can the light wavelengths be customized?

A: For OEM/ODM projects, different LED wavelength configurations can be evaluated according to the target market, product positioning and technical requirements.

Q: Is the mask suitable for different face shapes?

A: The flexible construction is designed to adapt to different facial contours and provide a closer fit than a rigid mask.

Why Choose XINGBU?

Jinhua Xingbu Technology Co., Ltd. has more than 10 years of experience in massage and personal-care product manufacturing and has also developed expertise in LED-based beauty devices.

The XB-15S Red Light Facial Beauty Instrument is designed around practical product requirements including light coverage, facial-and-neck operation, flexible fitting, control convenience and private-label customization, rather than simply increasing the number of LEDs.

For beauty-device brands and e-commerce businesses, we provide OEM/ODM support covering product configuration, prototype development, logo branding, UI customization, packaging and mass production.