EMS Massage Pillow for Neck and Shoulder

The XB-811B EMS Massage Pillow for Neck and Shoulder combines EMS stimulation, mechanical kneading, traction massage, vibration and heat in one compact neck massage device. It is designed for users who want different massage functions in a single product without using a large massage chair or fixed equipment.

The six-head massage mechanism performs programmed lifting, rotation and kneading movements. The EMS system provides adjustable electrical stimulation through skin-contact electrodes, while the heating system offers three temperature settings at 36°C, 38°C and 40°C. A built-in 4,800 mAh rechargeable battery supports cordless use at home, in the office or while traveling.

EMS, Kneading, Traction, Vibration and Heat in One Device

The XB-811B combines several functions in one neck massage system. EMS provides electrical stimulation through conductive electrodes, while the mechanical mechanism produces kneading, lifting and rotational movements. The vibration system operates at approximately 7,500 RPM, and the heating module provides three preset temperature levels.

This combination allows different functions to be used individually or together depending on the selected program.

Designed to Follow the Neck

The XB-811B EMS Massage Pillow for Neck and Shoulder uses a curved support structure to provide stable contact around the neck during use. The six groups of massage heads are driven by an internal motor mechanism and move according to the selected massage program.

The mechanism can perform lifting, rotation and kneading movements. This gives the product a wider range of physical massage actions than a basic massage pillow that mainly uses fixed rotating heads.

With a size of 280 × 240 × 93 mm and a weight of approximately 1.2 kg, the device is also suitable for storage in a home, office or travel bag.

Adjustable EMS Stimulation

The EMS system supports different pulse settings, including 4--7,000 Hz and 1,000--6,000 Hz frequency combinations, depending on the selected program.

Nine intensity levels allow users to adjust the electrical stimulation according to their preference. For first-time use, a low intensity is recommended before gradually increasing the setting.

Since EMS stimulation is delivered through skin-contact electrodes, stable contact between the electrodes and skin is important for consistent operation.

Mechanical Massage with High-Frequency Vibration

The mechanical massage system uses six groups of massage heads for programmed lifting, rotation and kneading movements. The movement pattern can change according to the selected mode, giving users different types of physical massage.

The vibration system operates at approximately 7,500 RPM and adds high-frequency mechanical vibration to the massage process. The vibration function can be combined with the mechanical massage and EMS functions according to the selected program.

Three Heating Settings

The built-in heating system provides three temperature settings: 36°C, 38°C and 40°C.

The user can select the required temperature through the control handle. The heating function can also be used together with selected massage programs to provide a warm contact surface around the neck.

LCD Control Handle

The XB-811B EMS Massage Pillow for Neck and Shoulder uses an integrated LCD control handle for operation. The handle provides access to the main settings while the massage pillow is positioned around the neck.

Users can select massage modes, adjust intensity, control EMS stimulation and select the heating level directly from the handle. The LCD display provides operating information without requiring the user to reach behind the neck to operate the device.

10 Massage Modes and 9 Intensity Levels

The standard configuration provides 10 massage modes and 9 intensity levels. Different programs can combine mechanical massage, EMS, vibration and heating in different ways.

For OEM projects, selected massage programs and EMS settings can be adjusted according to the final product configuration. This allows different versions to be developed for different retail markets and price ranges.

Technical Specifications

Suitable for Home, Office and Travel

Home Use

The compact design makes the XB-811B suitable for daily use at home. It provides several massage functions without requiring the space occupied by a massage chair or larger equipment.

Office Use

The 280 mm compact body can be stored in a drawer, cabinet or personal workspace. It can be used during breaks after long periods of desk work.

Travel Use

The built-in 4,800 mAh rechargeable battery allows cordless operation. Combined with the 1.2 kg body, the product can be carried for business trips and travel.

Before Bed

Lower-intensity massage and the heating function can be used as part of a personal relaxation routine before sleep.

Materials and Available Colors

The main housing is made from ABS, providing a rigid structure and a smooth surface that is easy to clean.

The neck-contact massage heads use conductive metal components for EMS electrode contact and heat transfer.

Standard colors include beige, purple and brown, with custom colors available for OEM projects.

XB-811B Compared with a Basic Massage Pillow

Manufacturing Process

Production of the XB-811B covers precision injection molding, EMS electrode welding, massage mechanism assembly, PCB programming, complete-unit inspection, aging testing and final packing.

Production flow:
Precision injection molding → EMS electrode welding → Massage mechanism assembly → PCB programming → Complete-unit inspection → 240-minute aging test → Final inspection and packing

EMS electrode connections are checked after welding, while the massage mechanism and control board are tested after assembly. Each completed unit then goes through a 240-minute aging test before final inspection.

Quality Testing

Each unit undergoes a 100 kg compression test to check the structural resistance of the housing and internal assembly under high loading conditions.

EMS output is inspected using an oscilloscope to check pulse stability and output consistency. This inspection is used to identify abnormal electrical output before the product enters final assembly.

A 240-minute full-load aging test is also performed before shipment. The test covers the motor, PCB, battery, heating system and control functions during continuous operation.

Certifications and Battery Documents

Depending on the final configuration and destination market, available compliance documentation includes CE (LVD/EMC), RoHS, FCC and REACH.

For versions equipped with a lithium battery, supporting documents such as MSDS and UN38.3 can be provided for transportation and customs requirements.

The applicable certification and testing requirements depend on the final product configuration and destination market.

OEM and ODM Configuration

The XB-811B can be customized for private-label brands, distributors and retail projects.

Selected functions should be confirmed during product development before mass production.

Manufacturing Capability

Jinhua Xingbu Technology Co., Ltd. manufactures massage, fitness and personal wellness equipment. For the XB-811B, the production scope covers the main mechanical and electronic assemblies, including the massage mechanism, EMS electrodes, PCB, heating system and complete-unit testing.

This integrated production process allows product configuration, appearance, control interface, packaging and selected functions to be coordinated within the same OEM/ODM project.

Customer Project

15,000 Units for an Israeli Rehabilitation Brand

XINGBU supplied 15,000 customized units to an Israeli rehabilitation and healthcare brand.

The customer selected the product for its combination of EMS stimulation, mechanical massage, vibration and heating in a compact neck-care device.

For public website use, customer names, satisfaction scores and repeat-order figures should only be published when supporting documents or customer authorization are available.

Packaging and Container Loading

The standard package includes:

- 1 × EMS Massage Pillow
- 1 × USB Charging Cable
- 1 × LCD Control Handle
- 1 × User Manual
- 1 × Retail Color Box

The compact body helps reduce packaging volume. Depending on the final retail box dimensions and loading arrangement, a 40HQ container can hold approximately 4,500--5,000 units.

The final loading quantity should be confirmed after the packaging design has been finalized.

How to Use the EMS Massage Pillow for Neck and Shoulder

1. Position the Pillow

Lie down or sit in a comfortable position and place the neck naturally in the curved support area.

2. Start the Device

Press and hold the power button on the control handle to start the device.

3. Select a Massage Mode

Press the M button to select the required massage program.

4. Adjust the Intensity

Use the + / − buttons to adjust the massage or EMS intensity. Start with a low setting when using the device for the first time.

5. Select the Heating Level

Choose 36°C, 38°C or 40°C according to personal preference.

6. Finish the Session

Turn off the device after use. Clean and store the product according to the user manual.

How the Massage System Works

The XB-811B uses a control system to coordinate EMS stimulation, mechanical massage, vibration and heating.

The EMS module delivers controlled electrical pulses through the conductive electrodes. The mechanical massage system uses a motor-driven mechanism to move six groups of massage heads through programmed lifting, rotation and kneading movements.

The vibration system adds approximately 7,500 RPM high-frequency mechanical vibration, while the heating module maintains the selected temperature.

The four systems can operate separately or in selected combinations depending on the massage program, allowing different operating configurations from one compact device.

Frequently Asked Questions

What is the difference between EMS and mechanical massage?

A: EMS uses electrical pulses delivered through skin-contact electrodes, while mechanical massage uses physical movement from the massage mechanism. The XB-811B combines both functions in one device.

How many massage modes does the XB-811B EMS Massage Pillow for Neck and Shoulder have?

A: The standard version provides 10 massage modes and 9 intensity levels. The functions included in each mode depend on the selected program.

What heating temperatures are available?

A: The heating system provides three settings: 36°C, 38°C and 40°C.

Can the EMS intensity be adjusted?

A: Yes. The device provides 9 intensity levels. A low setting is recommended for first-time users.

Is the device rechargeable?

A: Yes. The product uses a built-in 4,800 mAh rechargeable battery.

How many massage heads does the product have?

A: The mechanical system uses six groups of massage heads for lifting, rotation and kneading movements.

Can EMS parameters be customized for OEM projects?

A: Selected EMS pulse-frequency combinations can be evaluated and configured according to the final product specification.

Can the color and packaging be customized?

A: Yes. Housing colors, logos, retail packaging, manuals and selected control-interface elements can be customized.

Is the product suitable for travel?

A: Yes. The product measures 280 × 240 × 93 mm, weighs approximately 1.2 kg and uses a rechargeable battery, making it suitable for travel and mobile use.

Is the XB-811B a medical device?

A: The product should be marketed according to its actual classification and the regulations of the destination market. Unless the required medical-device approvals and supporting evidence are available, it should not be promoted as a product for treating or curing a medical condition.